Mini Truck Western Snow Plows
» Straight Blade & V-Plow Packages
» Fully Hydraulic Controlled from Cab
» Fits 2014-Up Diahatsu HiJet Mini Trucks (Model S510)
Contact Us
Western Snow Plows for Mini Trucks
» Heavy Duty Steel Construction
» Trip Protection for Obstacles
» Clear driveways, sidewalks, or small business parking lots.
CONTACT USBIG PLOW PERFORMANCE FOR MINI TRUCKS
Winter knows no limits-which means you shouldn’t either. Built exclusively for utility vehicles, including mini-trucks, the WESTERN® IMPACT™ Heavy-Duty snow plows are professional-grade plows built to go anywhere that demands WESTERN-grade performance. Constructed from high-strength, low alloy steel components, both the straight blade and v-plow feature an easy-on/easy-off mounting system and removable receiver brackets for exceptional ground clearance. IMPACT heavy-duty plows also feature Scrape Lock for clean scraping and back dragging.
The WESTERN® IMPACT mid-duty straight blade plows are perfectly sized for your 2014-Up Diahatsu HiJet mini truck. Packages available in either full hydraulic lift and angle or winch lift manual angle versions. The blade is available in two widths, 5’6″ or 6’0″-the 5’6″ blade widths are perfect for sidewalks and 6’0″ blades are ideal for wider areas/driveways. High-strength components ensure commercial durability. Fully hydraulic blade controls allow the operator to make the necessary blade adjustments quickly from inside the cab for fast and efficient winter cleanup.
WESTERN IMPACT PLOWS FOR MINI-TRUCKS – VIDEOS
BUY A TRUCK CONTACT USMINI TRUCK WESTERN SNOW PLOW UNIQUE FEATURES
STRAIGHT-BLADE CONSTRUCTION
The IMPACT™ straight blade UTV plow features a 14-gauge powder coated steel moldboard that is 6′ wide and comes with a standard 5″ steel cutting edge.
STRUCTURAL REINFORCEMENT
Four vertical ribs and high-strength, low-weight, alloy steel components ensure the plow is strong enough for commercial operation and light enough to fit more UTVs.
TRIP PROTECTION
Two heavy-duty coil springs protect your plow and UTV by allowing the whole blade to trip when striking obstacles.
V-PLOW-BLADE CONSTRUCTION
The IMPACT™ flared v-plow blades go from a 25¼” center height to a full 29¼” at the outer edge. The 14-gauge powder coated steel flared moldboard is 6′ wide and comes with a standard 5″ high-carbon steel cutting edge, reducing wear and extending the life of the blade.
V-STRUCTURAL REINFORCEMENT
Six vertical ribs, coupled with high-strength, low-weight, alloy steel components provide a favorable strength-to-weight ratio, keeping stress off of the UTV frame. A 3/4″ diameter, steel center pin resides within a three-connection-point hinge, keeping the wings tight for improved performance.
V-PLOW WIDTH ADJUST
When fully angled or in V mode, the IMPACT™ UTV v-plow plowing path is 5′ wide, and 4′ 7″ in scoop. For UTVs with a wider wheel base, a width-adjustment setting is available to make your plowing path wider in these positions. Using the alternate setting, the plowing width is 5′ 6″ when fully angled or in V, and 5′ 1″ in scoop.
V-PLOW-DOUBLE ACTING CYLINDERS
A standard feature on the IMPACT™ UTV v-plow, UltraLock double-acting cylinders allow the operator to use the v-plow in straight blade mode by locking the wings together instead of having to toggle each wing independently. The double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.
V-TRIP PROTECTION
Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles. Whether in V, scoop or straight blade configuration, the trip-edge helps protect the plow, the equipment, and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.
V-PLOW STEEL CENTER GAP
For the cleanest pass in any blade configuration, the IMPACT™ UTV v-plow has a snow control gap cover over the center hinge to help deflect and prevent snow from being lost over the top of the blade.
RELIABLE HYDRAULICS
We manufacture our own hydraulic components to ensure the highest standards of quality and reliability, so that you get a hydraulics system that’s not only fast and responsive, but that’s built to last season after season. Fully enclosed components are protected from the elements. Hydraulic Scrape Lock holds the blade down for more efficient scraping and clean back dragging.
V-TRIP PROTECTION
The removable receivers and low profile undercarriage provide exceptional ground clearance and maximize the ramp angle, so your unit will be trail ready when the plow is not attached.
EASY MOUNTING SYSTEM
Hooking up the IMPACT™ v-plow or straight blade is simple. With the receiver brackets installed on your utility vehicle, either drive in or manually push the plow into the receivers. Push up on the headgear to engage the hitch pins in the receiver holes, then slide the handle to lock the hitch pins in place. Finally, connect the electrical plug. Detaching the plow is just as easy. The receivers are removable, to maintain ground clearance.
WESTERN SNOW PLOW STANDARD FEATURES
CONTROL OPTIONS
The intuitive UTV-specific hand-held control lets you raise and lower the plow, and position the blade in V, scoop, angle and straight modes. An optional joystick control is also available for easy blade control operation when wearing gloves.
ANTI-THEFT SYSTEM
The exclusive WESTERN® SECURITY GUARD™ snowplow anti-theft system is a safe and secure way to electronically lock your snow plow when it is detached from your truck as a deterrent from theft.
RELIABLE HYDRAULICS
The WESTERN® Scrape Lock system locks the plow in any position you put it in to give you a cleaner scrape, especially while back dragging. With the plow locked in place, Scrape Lock gives you the performance of a larger plow without the extra weight and without the need to push any extra buttons.
ACCESSORY READY
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.
WESTERN SNOW PLOW MINI-TRUCK ACCESORIES
WING EXTENSION KITS
Get more jobs done faster with plow wings. Available for the IMPACT™ UTV v-plow, these wings add more carrying capacity. Made of 14-gauge steel with high strength steel ribs, the wings are a perfect compliment to an IMPACT UTV v-plow blade. No installation required-the innovative design means quick and easy attach/detach.
LIGHT BAR KIT
The IMPACT™ Heavy-Duty UTV light bar accessory features twin LED headlamps to help keep you on the right path. Like IMPACT UTV snow plows, the light bar accessory is sturdy and engineered to stand up to the rigors of commercial plowing operations.
RUBBER SNOW DEFLECTORS
Control the snow and always see where you’re going with optional deflectors. The 2-ply rubber snow deflector custom fits the IMPACT™ UTV V-plow and straight blades. Bolt on steel plates ensure proper positioning of the deflectors to keep your view clear and clean.
CURB GUARDS
Go right up to the edge with bolt-on curb guards. Protect the outer edge of your snow plow from wear when plowing along sidewalks and curbs. Made of cast metal, each curb guard effectively protects the outer edge of the plow.
*Curb guards cannot be used simultaneously with Wing Extension Kits
POLY CUTTING EDGE
Protect decorative concrete, driveways and other delicate surfaces with these poly cutting edges. Made of resilient compounds that allow for longer life, these poly edges adjust to road surface irregularities without gouging and quickly remove all types of snow.
SHOE KIT
Protect your plow and the road, while extending the life of your cutting edge with an adjustable shoe kit. The cast iron construction and shape increases the surface contact area and helps glide over gravel and dirt at the correct height. Extending cutting edge and base angle life when plowing on rocky or abrasive surfaces.
WESTERN SNOW PLOW GALLERY
EPA Certified
Off-Road Ready
